How to Set up Nectar Adjustable Bed Frame?

To set up the Nectar Adjustable Bed Frame, follow these steps:

Unbox and lay out all parts, making sure everything is present and undamaged.
Assemble the outer frame first.

Attach the central support beams and legs to the frame.
Carefully place the slats and secure the mattress retainer bar.
Connect the power supply and the remote control to activate the frame's adjustable features.

Ensure each step is done accurately for a stable foundation that complements your Nectar mattress.

Unboxing Your Bed Frame

When the bed frame arrives, open the package carefully to check for all parts and ensure they are undamaged. The Nectar bed frame, weighing approximately 80 pounds, is well-packaged to protect it during shipping.

After unpacking, fit the exterior pieces at the corners and use the provided plugs to secure them. For ease of assembly, follow the included instructions. Connect the center part with pegs and attach the corners using foot holders, ensuring they are correctly oriented. Flip the frame to tighten the foot holders, then attach the legs to the center support and insert the slats into their slots.

Place the fabric bottom piece over the slats in preparation for the mattress.

Completing these steps correctly assembles a bed frame that works with the Nectar mattress, with the total sleep system valued at approximately $1000.

Identifying All Components

To assemble the Nectar adjustable bed frame, follow these steps:

Take out all parts from the 80-pound box.

Start with the four main structural pieces and connect them at the corners to form the frame's perimeter.
Use the provided plugs to secure the corners by inserting them into the frame's junction holes for stability.

Join the four outside parts using the included pegs:

Ensure the pegs are correctly aligned.
Push the pegs through the designated holes.

Ensure the middle part is threaded through its designated spot with the correct side up.

Turn the frame over to attach the two legs to the center support. This step is crucial for stability.
Insert the slats into the frame grooves with their straps facing down. This creates a solid base for the mattress.
Finally, place the fabric bottom piece over the slats to finish the setup. The fabric bottom piece has styrofoam-reinforced corners.

Choosing the Ideal Location

Choosing the right location for your Nectar adjustable bed frame is important. You'll need a large area for both the assembly process and the final setup of the bed. The frame weighs 80 pounds, so you should have enough space to unbox and organize its parts. This is necessary to make sure you have all the components and can identify them during assembly.

The location must allow you to move freely, especially when attaching the middle section and the slats. You should be able to turn the frame over without obstruction from furniture or walls to avoid frustration and reduce the risk of injury.

After the frame is assembled and upright, you'll still need space to tighten all the screws properly. Attaching the fabric bottom piece also requires access from all sides to ensure it's aligned and secured correctly.

Assembling the Frame

To assemble the Nectar adjustable bed frame, follow these steps:

Verify that all parts are accounted for and identified.
Unbox and arrange all pieces by the bed space.
Connect the four exterior sections of the frame's shape using the included pegs.

Ensure that the sections are oriented correctly before joining them together.
Once the frame's perimeter is complete, add the middle support piece with the correct side facing up.
Turn the frame over to attach the legs to the bottom, starting with the center support.

Flip the frame right-side up and tighten all screws for stability.
Insert the slats into the frame's grooves evenly.
Place the fabric bottom over the slats with the straps facing down to protect the slats and create an even surface.

After installing the fabric bottom, place the mattress on the frame.
The total cost for the Nectar bed and frame is approximately $1000, which is a significant investment in home comfort.

Attaching the Legs

Attach the legs to the bed frame by placing them in the foot holders at each corner and the center support piece. Ensure each leg is aligned with the holders before screwing them in. Use the provided screws to secure the legs. This is important for the bed's stability and to support the mattress and its users.

Tighten the screws on the legs to ensure the frame is stable and level. Attach two legs to the center support piece to prevent sagging and extend the frame and mattress's life.

With the legs attached, flip the bed frame onto its feet with help to prevent damage or injury. Check and tighten each leg's screws for added stability.

Insert the slats into the frame's grooves evenly for consistent support. Place the fabric bottom piece over the slats to protect the mattress from potential damage.

After positioning the fabric bottom, the bed frame is ready for the mattress. Place the mattress on top to finish setting up your Nectar adjustable bed frame. Following these instructions will provide a secure base for sleep.

Securing the Mattress Retainer

Install the mattress retainer on your Nectar adjustable bed frame to keep the mattress in place.

First, find the holes at the foot of the bed frame and insert the provided plugs. Make sure the mattress retainer parts are aligned correctly, then tighten the foot holders to secure the frame.

Next, attach the corners of the mattress retainer to the frame for a strong hold. Distribute the slats evenly in the frame grooves to support the mattress and prevent sagging. Cover the slats with the fabric bottom piece to protect the mattress.

Connecting the Power Supply

After attaching the mattress retainer, connect the power supply to your Nectar adjustable bed frame. Locate the power port, which is usually on the side or at the head or foot of the frame. Insert the power supply plug into the port securely to enable the bed's adjustable functions.

Ensure the power cable is neatly routed to avoid interference with moving parts and to prevent tripping. Avoid bending the cable sharply to prevent damage.

Test the connection by pressing the power button on the remote or bed frame. If the bed does not react, recheck the connection and the power outlet.

A secure power connection is essential for the bed's functionality and safety. Once the power supply is confirmed to be working, continue with the mattress installation.

Syncing the Remote Control

To sync the remote control with the Nectar adjustable bed frame, follow these steps:

Connect the bed to a power source and turn it on.
Find the pairing button on the underside of the bed base.

Press and hold the pairing button.
While holding the pairing button, press any button on the remote control to start the pairing process.
Release the pairing button once the bed responds to the remote.

If the remote is now synced, you can test it by adjusting the bed with the remote. However, if it doesn't sync, try the steps again, making sure to apply firm button presses and ensure a stable power supply. Proper syncing is necessary to use all the features of the bed frame.