To open a Nectar mattress, first move the box to the bedroom.
Then remove the mattress from the box and place it on the bed frame or floor. Carefully cut through the plastic wrap without harming the mattress.
Once unwrapped, the mattress will begin to expand, which could take a few hours to fully complete.
There may be a slight smell at first, which will go away with time and air.
Check the Package Contents
When you receive your Nectar mattress, check that the package contains all parts by comparing it with your order. The mattress will be compressed in a box for easier transport.
Before unpacking, ensure the mattress size and model match your purchase. Look for any extra items like a mattress protector or instructions. Once everything is accounted for and in good condition, set up a space by your bed frame to unbox the mattress.
Carefully take the mattress out of the box and remove the plastic without using sharp tools to avoid damage. Once you remove the plastic, the mattress will start to expand. Leave it for up to 48 hours to fully inflate and release any odors. This period allows the mattress to adjust and get ready for use.
Find a Suitable Space
Choose a large, airy room to unpack and let your Nectar mattress expand. Ensure the space fits the mattress's full dimensions and allows for easy movement. Avoid small or crowded areas to prevent damage to the mattress or other items.
Select a room that promotes good air circulation to clear out any new mattress smells, known as off-gassing, which should lessen after a few days.
Place the mattress in a spot where it can expand without disturbance, as it needs several hours to reach its final shape and firmness. Using the mattress too soon can hinder its quality and lifespan.
Ideally, unpack the mattress on the bed frame or foundation where it will stay to avoid moving it later, which can be difficult and might damage the mattress. Proper space selection is key to an efficient setup.
Remove Outer Packaging
To unbox the Nectar mattress, start by positioning it in the desired area. Use scissors to remove the outer plastic wrap with caution to avoid damaging the mattress. Find the end of the plastic seal and carefully insert the scissors, cutting along the length of the mattress to prevent tearing.
As you remove the plastic, the mattress will begin to expand. Allow room for it to reach full size. The mattress was compressed for shipping and may take some time to inflate to its full thickness.
An initial odor from off-gassing is normal and should fade within a few days.
Unroll the Mattress
Place the mattress on a flat surface, aligning it properly. Unroll it from the packaging and carefully remove the remaining plastic without damaging the mattress material.
Use scissors or a specific cutting tool to make a careful cut through the plastic without cutting the mattress. Start from the top and peel away the plastic as the mattress unrolls. Handle gently to avoid damaging the foam.
The new mattress may emit an odor, which is normal and not harmful. This smell from the manufacturing process will dissipate within a few days.
Allow the mattress to expand for 24 to 72 hours before use to ensure full performance and comfort.
Carefully Cut the Plastic
Start by cutting the plastic's outer layer with scissors to prevent damage to the mattress fabric underneath. Avoid using a knife to reduce the risk of tearing the mattress material. Ensure the scissors are sharp for easy cutting but maintain control for accuracy.
Carefully make a cut along the plastic wrap's edge. The mattress is compressed and vacuum-sealed, so it will start to expand as soon as you cut the plastic. Keep the scissors close to the plastic and away from the mattress as it expands.
Peel back the plastic layer while keeping a firm hold to prevent the mattress from unrolling too quickly. The mattress might look, smell, and feel different initially due to its vacuum-packed state, which is typical for memory foam mattresses.
After cutting away all the plastic, remove it completely to uncover your Nectar mattress. Dispose of the plastic safely, ensuring it's out of reach of children and pets to avoid suffocation risks.
Let the mattress expand completely and air out before using it. This period allows the mattress to reach its full comfort and support capabilities.
Allow for Expansion
After removing the plastic, let your Nectar mattress expand for 24 to 72 hours to achieve full comfort and support. This time is essential for the mattress to decompress after being tightly packed for shipping. The foam layers will air out and help the mattress return to its proper shape and firmness.
The mattress begins to expand as soon as it's unwrapped, but it takes a few days to fully complete. For even expansion, place the mattress on a flat surface. This will also prevent uneven shapes from forming.
The expansion time also allows for the removal of any 'new mattress smell,' a common non-harmful odor from the manufacturing process. To reduce this smell, keep the room well-ventilated.
Do not make immediate judgments about the mattress's comfort. The Nectar mattress materials conform to your body over time, so it may initially feel different than its long-term use. Once fully expanded and aired out, the mattress will offer the intended support and comfort for sleep.
Position on Bed Frame
Place the mattress on the bed frame after it has fully expanded. Make sure it is aligned with the frame's edges and corners to ensure stability and prevent uneven wear. The mattress should be centered on the frame.
Use a bed frame or base compatible with a Nectar mattress, which should have a solid or slatted surface with slats no more than 3 inches apart for proper support and airflow. For platform beds or adjustable bases, the surface must be flat.
Before positioning the mattress, ensure it has reached its full size for proper support and comfort. Align it carefully with the frame, and if there is a headboard or footboard, center the mattress between them. Proper alignment ensures the bed's appearance and accessibility.
Initial Care and Maintenance
After you unbox your Nectar mattress, it needs time to expand and air out before you use it. It has been tightly packed for shipping, so it will take some time to reach its proper shape and comfort. A new mattress may have an odor from off-gassing, which is normal and should go away in a few days if the room is well-ventilated.
Do not put heavy objects on the mattress while it is expanding. Leave it flat and uncovered to allow it to fully inflate and air out. The mattress may seem different at first, but it will achieve its correct firmness after a short period.
The Nectar mattress should not be flipped as it is designed to be one-sided, but you should rotate it 180 degrees every few months to wear it evenly and make it last longer. Use a supportive bed frame and foundation to prevent sagging. A mattress protector is also recommended to protect against spills and stains, which can affect the warranty and cleanliness.
Taking these steps when you first get your mattress will help ensure it provides a comfortable sleep for years to come.
